NVision Releases Turbine Blade-Scanning Technology

NAW Staff, Friday 29 June 2007 - 10:04:22

Southlake, Texas-headquartered NVision Inc. has introduced the MAXOS optical scanning system. Compared to a coordinate measuring machine (CMM), MAXOS can reduce the amount of time required to inspect turbine blades, NVision says.

The MAXOS scanner uses a proprietary non-contact probe consisting of a point of white light that allows the collection of individual points at a rate of 70 per second. Like a touch-probe CMM, NVision explains, the unit collects individual points. But unlike a conventional CMM, it continues on its path at high speed and without pausing.

NVision notes that because the MAXOS scanner measures with a single white light point, the cause of inaccuracy and approximation inherent in three-dimensional measurement with a ball probe is eliminated as well.

While originally developed for other turbine uses, this technology could also be used for scanning wind turbine blades, according to an NVision representative.



this content item is from North American Windpower
( http://www.nawindpower.com/e107_plugins/content/content.php?content.930 )