in News Departments > New & Noteworthy
print the content item



A wind consortium says it has successfully deployed a power curve measurement procedure that analyzes power output in constantly changing conditions.

The procedure is part of a consortium comprising DTU Wind Energy, DONG Energy, Siemens Wind Power and Avent Lidar Technology. The Danish Energy Technology Development and Demonstration Program provided funding for the three-year effort.

According to Avent, which recently mounted its WindIris LIDAR system atop a Siemens turbine at the 367 MW Walney Wind Farm, the procedure is an upgrade to using met masts, the traditional method to measure power performance.

"Measurements of wind turbine power curves are a key issue for the wind industry," explains Thomas Velociter, CEO at Avent. "But conducting power performance verifications with met-masts is often difficult and extremely expensive, particularly offshore or in onshore complex terrains, which means that verifications and measurements are sometimes skipped all together.

He says that nacelle-mounted LIDARs allow for accurate and affordable measurements, resulting in reduced cost of energy and increased competitiveness.

The technology has been submitted to the expert and standardization groups Measnet and IEA Task 32 in order to be upgraded to an internationally recognized standard. It opens new possibilities for cheaper and more frequent power performance measurements.

According to Avent, the project evolved from a ground-based WINDCUBE LIDAR from Leosphere, which was adapted to be placed on the turbine nacelle for forward looking horizontal measurements. Over the course of the project, several prototypes were developed and tested, and have evolved into a new product called WindIris, which integrates all the elements of the procedure.

The WindIris, manufactured and commercialized by Avent, has been specifically designed for turbine-mounted measurements, which require a product sturdy enough to endure adverse factors, such as nacelle vibrations.

"One of the main challenges was to obtain an equivalent procedure to the IEC 61400-12-1 power performance measurement standard," says Velociter. "To achieve the required level of accuracy and repeatability, the developed procedure accounts for each one of the measurement requirements. For example, it specifies how to measure at hub-height +/- 2.5% at 2.5 rotor diameter in front of the turbine and account for the deviation inherent to the flexibility of the turbine."

Photo caption: The WindIris LIDAR situated atop a Siemens offshore wind turbine.
Photo courtesy of DONG Energy


Helukabel_id1908
Latest Top Stories

Report Disputes U.S. Agency's Renewable Energy Projections

A new analysis from the Sun Day Campaign says renewables are slated to provide 16% of U.S. generating capacity by 2018 - over 20 years earlier than forecast by the Energy Information Administration.


Kansas Renewables Mandate Survives Yet Another Attack, But Is It Too Early To Celebrate?

Over the past three years, some legislators have tried to either weaken or repeal the state's renewable portfolio standard, which requires Kansas utilities to reach 20% renewables by 2020.


AWEA Highlights U.S. Wind Success Stories Of 2013

Despite a 92% drop in new capacity last year, the sector still has myriad reasons to celebrate, according to a new report from the American Wind Energy Association.


Feds List New Bird Species As Threatened - Should Wind Developers Be Worried?

The U.S. Fish and Wildlife Service is designating the lesser prairie-chicken as threatened under the Endangered Species Act. An expert explains how this might affect the wind industry.


Senate Committee Passes Bill With Two-Year PTC Extension

The Senate Finance Committee has voted on a tax extenders package, which includes both the production tax credit (PTC) and investment tax credit, and sent it to the floor.

WomenofWind_id
JLG_id1900
UEA_id1896
Acciona_id1907
AWEA_id1886
bonfiglioli_id1913